H
热门项目
ot item
ACCOR验厂咨询
C
联系方式
ontact us
电话4006900031
邮箱kevin@cts1983.com
位置深圳市龙岗区平湖街道平安大道1号华耀城12栋605
二维码
扫一扫
获得更多信息

ASICS验厂咨询|供应商进行内饰检查应针对的内容汇总

作者:
发布时间: 2024-10-14
阅读人数: 16

2.2 Trim Inspection

ASICS recommend conducting inspection all labels, heat transfer logo, snaps, buttons, zippers, Velcro, tapes elastics, packing materials etc…

We recommend inspecting according to AQL 1.5 Normal or Tightened sampling should be used to determine acceptance.

This sample must cover all colors, shades and sizes and any other variation received.

If a consignment is less than 500 pieces, carrying out 100% inspection is preferable Trim inspection should be carried out for the following points:

Shade, color, size, design, layout, wording, where appropriate, Material Code, Graphics, against the approved trim card.

General quality consistency.

Received quantity against packing list and ordered quantity.

All non-confirming goods to be segregated marked clearly and stored separately to avoid issuing to the production.

Failed lot need to be inspected 100%.

Trim card should be approved by ASICS.

(The details please refer to the ASICS Material Quality Standard.)

Heat transfer inspection

When factory receipt heat transfer, manufacture should test on bulk fabric prior to starting production. Testing method is:

  1. Stretching in horizontal and vertical directions and examined immediately to ensure proper adhesion and that the heat transfer is not peeling off.
  1. Washing test (please refer to testing manual)
上一章: 已经是第一章
下一章: ASICS验厂咨询|要求供应商在工厂面料检验中实施四点制度
文章来源:
微信陈老师
陈老师微信
微信杨老师
杨老师微信
微信王小姐
王小姐微信
微信郭小姐
郭小姐微信
热线电话热线电话
电话号码1 18576401396 电话号码2 18038044554
在线咨询在线咨询
转发网站转发网站
在线留言在线留言
回到顶部回到顶部
图片请您留言
图片